<rp id="dmbl0"><ruby id="dmbl0"></ruby></rp>

        <tbody id="dmbl0"></tbody>
      1. 
        
        <button id="dmbl0"><object id="dmbl0"></object></button>
          <li id="dmbl0"><acronym id="dmbl0"></acronym></li>

          歡迎來到深圳海江光電有限公司官網!

          等離子清洗機廠家

          咨詢電話:

          13543269361

          等離子清洗設備,等離子清洗機廠家
          您當前的位置 : 首 頁 > 產品中心 > 三軸平臺系統
          直噴等離子處理機

          直噴等離子處理機

          • 所屬分類:三軸平臺系統
          • 瀏覽次數:
          • 發布日期:2020-11-24 15:00:50
          • 產品概述
          • 性能特點
          • 技術參數

          產品名稱:直噴等離子處理機

          等離子

          設備簡介Chapter I Brief Introduction to Equipment                   

          本設備采用常壓等離子處理技術。是用于表面清洗,活化,涂層的創新技術。

          The equipment uses the atmospheric pressure plasma processing technology, which is an innovative technology used for surface cleaning, activation and coating. 

          1.1基本理論概念 

          Basic theoretical concept 

          1.1.1等離子態

          Plasma state 

          物質接受了能量,會發生從固態到液態,再從液態到氣態的聚集態變化。很強能量激勵到氣體分子,會發生電離,并轉變為另一種氣體聚集狀態,即等離子態。當高能的等離子轟擊到其它物質表面時,會發生化學及物理性的反應作用,產生了一些有利的功能性應用。

          After receiving energy, the substance will have the aggregation state changes from solid state to liquid state and then from liquid state to gaseous state. The gas molecules will be ionized after incited by strong energy and changed into another gas aggregation state, namely, plasma state. The high-energy plasma bombarding to the surface of other substances will cause physical and chemical reaction effect, resulting in some favorable functional applications. 

          1.1.2表面預處理

          surface pretreatment 

          等離子體對材料表面處理,基本有以下幾大功效:

          The surface treatment of plasma on other materials has basically the following major effects: 

          活化: 大幅提高表面的浸潤性能,形成活性的表面

          Activation: substantially increase the surface soakage and form active surface 

          清潔: 去除灰塵和油污,精細清洗和去靜電 

          Cleaning: remove dirt and oil, finely clean and remove static electricity 

          涂層:  通過表面涂層處理提供功能性的表面 

          Coating: provide functional surface by surface coating 

          第三章  主機外部構成及說明

          Chapter III External Structure and Description of Host Machine

          3.1主機前面板和主機后面板

          Front panel and rear panel of host machine 

          微信圖片_20201124145400.png


          1.2設備特點

          Equipment characteristics 

          本設備具有如下技術特點:

          The equipment has the following technical characteristics: 

          可靠的系統性能

          Reliable system performance 

          系統設備實行自檢以及全面過程的狀態及參量監測、監控,并報警保護。

          The system equipment implements self-test and the overall process of state and parameter monitoring and control and alarm protection. 

          友好的顯示界面

          Friendly display interface 

          液晶方式的人機圖文操作界面,豐富的信息顯示和設備工作參量設置。

          LCD human-machine graphic user interface, abundant information display and equipment working parameter setting. 

          靈活的控制方式

          Flexible control mode

          可實現主機面板控制、遠程控制;也可實現人工控制,或自動化在線控制方式。

          The panel control and remote control of host machine can be realized; the manual control or automated online control mode can also be realized. 

          適合多種使用場合

          Suitable for many use occasions 

          模擬量或脈碼方式實現“速度 Vs 功率”跟蹤控制要求;

          Analog quantity or pulse code mode achieves “speed Vs power” tracking control requirements; 

          等離子的處理能量強度(亦即輸出功率)可以隨受處理材料的移動速度(工廠流水線的傳動速度)線性跟蹤調節。進而達到均勻一致的處理效果。

          Plasma treatment energy intensity (namely, output power) can be tracked and adjusted linearly with the movement speed of treated materials (transmission speed of factory assembly line), thus achieving a uniform and consistent treatment effect. 

          多種噴射槍嘴選用??蛇m合多種的處理應用場合。

          A variety of spray gun nozzles are for selection. The equipment is suitable for a variety of treatment application occasions. 

          先進的遠程控制

          Advanced remote control  

          可通過RS485方式遠程,也可根據客戶要求定制。

          Remote through RS485 mode or customized according customer requirements. 


          第二章  設備主要技術參數

          Chapter II Main Technical Parameters of Equipment 

          2.1電源電壓:    220( ±10% ) Vac  50/60Hz, 電源輸入保險絲規格:10A/250V

          Power supply voltage: 220( ±10% ) Vac  50/60Hz, power input fuse specification: 

          2.2工作高頻頻率:     18KHz ~ 60KHz

          Operating HF frequency: 18KHz ~ 60KHz

          2.3工作高壓:         2KV ~ 7KV

          Operating high voltage: 2KV ~ 7KV

          2.4極大實用輸出功率:  1100W

          Maximum practical output power: 1100W

          2.5極大功率消耗:     ≤1100W

          Maximum power consumption: ≤1100W

          2.6工作氣壓范圍:      0.05MPa~0.5MPa    (0.5Kg~5Kg)

          Operating air pressure range: 0.05MPa~0.5MPa    (0.5Kg~5Kg)

          2.7氣源要求:輸入氣壓:0.30MPa~1.00Mpa    (3Kg~10Kg) 

          Gas source requirements: input air pressure: 0.30MPa~1.00Mpa    (3Kg~10Kg)

          如氣源氣壓超出1Mpa(10Kg),需要外部加設限壓閥。

          In case that the gas source pressure exceeds 1Mpa (10Kg), the pressure limiting valve is required externally. 

          輸入管口徑:Φ8mm

          Input tube caliber: Φ8mm

          氣源可使用普通空氣。特別工藝技術要求時,可應用氮氣或其它特定的氣體。

          The normal air can be used as the gas source. Nitrogen or other specific gases can be use as required by special technology. 

          要求必須是無油無水氣源。

          The oil-free and anhydrous gas resource is required. 

          2.8外形尺寸與重量

          External dimensions and weight 

          主機箱體尺寸:180mm 寬 ( W ) X 356mm 高 ( H ) X 479mm 長 ( L )

          Host machine dimensions: 180mm width (W) X 356mm height (H) X 479mm length (L) 

          主機箱重量: 17Kg 

          Host machine weight: 17Kg

          普通離子噴槍體重量:   1kg 

          Ordinary iron gun weight: 2kg          

          旋轉式離子噴槍體重量: 3 Kg

          Rotary iron gun weight: 3kg

          注:旋轉式離子噴槍體不屬于標準配置,需根據客戶需要配置。

          Note: the rotary iron gun does not belong to standard configuration and shall be configured according to customer needs. 

          2.9輸出線纜長度: 凈長度 ≥ 3500mm 

          Output cable length: net length ≥ 3500mm

          注:如客戶有特別要求,可定制。

          Note: the cable can be customized if customers have special requirements.                  


          上一篇:低溫直噴等離子2020-11-26
          下一篇:在線寬幅等離子系統2020-11-26

          Z近瀏覽: